Below are answers to some of the most frequently asked questions regarding the ECO-heater Panel heater products.
Eco-Heater Panel Heater Model 110250 warms approximately 75 sq ft of room space or an 8′ x 9′ room.
Eco-Heater Panel Heater Models 110400, NA400S and 0602 warm approximately 120 sq ft of room space or a 10′ x 12′ room.
Does the unit have a fan/how does it work?
Using convection technology, heat is mainly generated behind the heater in the space between the panel and the wall, which leads to an efficient up-draft of heat circulated into the room. This principle of convection means that about 90% of the heat comes from the back of the panel, while only 10% is radiated from the front of the panel. This form of “background” heating is not only very economic, but also safe and efficient.
Underwriter Laboratories (UL) does not recommend using the heater in high moisture areas such as the bathroom where steam is produced or where an individual could touch the heater while in contact with water.
- Use the holes provided in the lightweight polystyrene packing OR the heater itself as a template to mark the position of the four holes on the wall (ensuring that the template is level) and then drill the holes using an 8mm masonry drill bit.
- For best results, ECO-Heater wall panel heaters should be mounted approximately 150mm (6 inches) above floor/skirting board and away from windows and doors.
- The panel should be installed with a 3/4-inch gap between the wall and the unit.
Please let us know if you need additional information at firstname.lastname@example.org.
ECO-heaters can be mounted on almost all types of wall materials including wood, drywall, plywood, and cement.
While we cannot determine if heating your house with ECO-heaters would be sufficient heat since we are unaware of what your heating needs are. Factors such as: where you live, how large your house is, what is the expected temperature you want the house to be would all play a part in this answer.
You can expect an ECO-heater to raise the temperature in a well insulated 10 x 12 room approximately 10-15 degrees. There are a lot of factors that contribute to the efficiency (i.e., windows, insulation, ceiling height, installation of unit, closed room).