 |
Download Brochure
Buy Now!
|
|
Features
 | | Model NA400S |
Product Information
ECO-heaters offer out-of-the-way wall mounting and is an economic way of providing efficient room heating at a low cost. Using convection technology, heat is mainly generated behind the heater in the space between the panel and the wall, which leads to an efficient up-draft of heat circulated into the room. This principle of convection means that about 90% of the heat comes from the back of the panel, while only 10% is radiated from the front of the panel. This form of "background" heating is not only very economic, but also safe and efficient.
Your ECO-heater is designed as an alternative to conventional space heaters and other systems that use large amounts of electricity. It operates using the same electricity as 4 100 watt light bulbs, while heating an entire room.
There are numerous advantages to using ECO-heaters. They save on floor space, are safe to use around children and pets, and can be painted to match any décor with water based Latex paint. ECO-heaters are designed to be left on for long periods of time, giving you comfortable background heat at a low cost. This is similar in concept to a central heating system - yet far less expensive.
ECO-heaters are tested and certified to Underwriters Laboratories (UL) safety standard 2021 and International Electrotechnical Commission (IEC) safety standard 60335-2.
Product Specifications
| Color: |
|
Neutral White (Can be painted to match any wall color) |
| Weight: |
|
15 lbs (in packaging) |
| Size: |
|
23 1/4" x 23 1/4" x 3/8" |
| Power: |
|
400 watts @ 3.3 amps |
| Outlet: |
|
120 volt U.S. outlet (6 ft. power cord) |
Can be Painted
ECO-heaters can be painted to match any wall color
Side-mounted ON/OFF Switch
ECO-heaters are equipped with an on-board On/Off switch which is conveniently located on the front of the heating panel. Not only is it now easy to switch the heater on or off, but the low intensity light on the switch lights up when the heater is switched on, making it easy to check the status of the heater.
 Easy Install Kit
ECO-heaters patented easy install kit uses the lightweight styrofoam packaging as a template to mark the 4 holes that correspond to the mounting holes. Drill bit is included with each unit.
 Click here to go to Installation Guide
 | | Model NA400S | Super silk coating
ECO-heaters have a high-tech super silk PVA waterproof paint applied. This new paint provides a much smoother and elegant finish and makes it easy to remove possible dirt marks (wipe-clean or wash-and-wear type surface). The paint also assists in preventing external moisture or steam from being drawn into the panel.
|
|
