 |
|
|
 Installation Guide
ECO-heaters are designed to be quickly and easily installed following the instructions given with every panel and using the mounting kit provided. Installation time is less than 10 minutes per panel.
Use the holes provided in the lightweight polystyrene packing OR the heater itself as a template to mark the position of the four holes on the wall (ensuring that the template is level) and then drill the holes using an 8mm masonry drill bit. For best results, ECO-Heater wall panel heaters should be mounted approximately 150mm (6 inches) above floor/skirting board and away from windows and doors.
|
|
